 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GBU6A - GBU6M GBU6A - GBU6M 0.125 X 45O (3.2) Typ Features * * * Surge overload rating: 175 amperes peak. Reliable low cost construction utilizing molded plastic technique. Ideal for printed circuit board. 0.710 (18.0) 0.690 (17.5) 0.100 (2.54) 0.085 (2.16) 0.080 (2.03) 0.065 (1.65) 0.740 (18.8) 0.720 (18.3) 0.075 R (1.9) 0.880 (22.3) 0.860 (21.8) 0.160 (4.1) 0.140 (3.5) 0.020 R TYP 0.310 (7.9) 0.290 (7.4) 0.085 (2.16) 0.065 (1.65) + + + ~ ~ 0.080 (2.03) 0.060 (1.52) GBU 0.050 (1.27) 0.040 (1.02) 0.050 (1.3) 0.040 (1.0) 0.210 (5.3) 0.190 (4.8) 6.0 Ampere Bridge Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RJA RJC Tstg TJ Average Rectified Current TA = 25C unless otherwise noted Dimensions are in: inches (mm) Parameter @ TA = 100C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient,** per leg Thermal Resistance, Junction to Case,*** per leg Storage Temperature Range Operating Junction Temperature Value 6.0 175 14.5 8.6 3.1 -55 to +150 -55 to +150 Units A A W mW/C C/W C/W C C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5 x 0.5" (12 x 12 mm). ***Device mounted on Al plate with 2.6 x 1.4" x 0.06" (6,5 x 3.5 x 0.15 cm). Electrical Characteristics Parameter TA = 25C unless otherwise noted Device 6A 6B 100 70 100 6D 200 140 200 6G 400 280 400 5.0 500 1.0 127 6J 600 420 600 6K 800 560 800 6M 1000 700 1000 50 35 50 Units V V V A A V A2Sec Peak Repetitive Reverse Voltage Maximum RMS Input Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, per element @ rated VR TA = 25C TA = 125C Maximum Forward Voltage Drop, per element @ 6.0 A I2t rating for fusing t < 8.35 ms (c)1999 Fairchild Semiconductor Corporation GBU6A-GBU6M, Rev. A GBU6A - GBU6M Bridge Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 6 FORWARD CURRENT (A) Forward Characteristics 100 FORWARD CURRENT (A) 5 4 3 2 1 0 MOUNTED ON PC BOARD, TA 0.5" (12.7mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD HEAT-SINK MOUNTING, TC 4x4x0.15" COPPER PLATE 10 1 TA = 25 C Pulse Width = 300s 1% Duty Cycle 0 50 100 TEMPERATURE ( C) 150 0.1 0.7 0.8 0.9 1 1.1 1.2 FORWARD VOLTAGE (V) 1.3 1.4 Reverse Characteristics 10 REVERSE CURRENT ( A) T A = 100 C Non-Repetitive Surge Current 175 FORWARD SURGE CURRENT (A) 140 1 105 70 T A = 105 C 0.1 TA = 25 C 35 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Junction Capacitance 400 CAPACITANCE (pF) 100 50 TA = 25 C f = 1.0 MHz Visg = 50m Vp-p 10 1 5 10 REVERSE VOLTAGE (V) 50 100 GBU6A-GBU6M, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM DISCLAIMER ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Price & Availability of GBU6D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |